Finally!
Posted on Saturday, August 15th, 2009 at 12:19 am by Jeff HoyI just noticed that Losi has released a ball differential for the Highroller. If you’ve read some of my previous articles about my Highroller you’ll know that the stock gear differential is probably the biggest issue with the truck. So if you have a Highroller then get over to your local hobby shop and buy one right now. You’ll see a major improvement in your Highroller’s performance. I guarantee it.
Losi’s new preassembled Ball Differential comes fully prebuilt from the factory and is ready to be dropped into Losi’s 1/10 Slider, 1/10 HIGHroller and 1/10 Strike SCT. This differential was designed to withstand high-powered motor and battery setups, and allows the user to make adjustments for enhanced steering and traction.
Click for more: Losi: Ball Diff: SL, HRL, SCT: Losi (LOSB3594)
There’s also another new product that caught my eye: CV Drive Shafts. These drive shafts are a little more efficient at delivering power to the wheels than the stock dog-bone drive shafts. I’m going to assume that they are a little tougher too. Weak drive shafts and axles were another issue I had with my Highroller.
These CV-driveshafts will also improve rear traction since they allow the rear end of the vehicle to work more efficiently.
All parts are made from precision machined high quality steel to prevent the parts from bending and breaking, and come completely assembled and greased for easy installation
Click for more: Losi: CV-Driveshaft Set: HRL, SCT: Losi (LOSB3589)
These two products immediately jumped to the top of my r/c must buy list. After I get them I’ll give a full report.
